Thermal survey · 3D heat map · engineering analysis
Illustrative example – not real measurement data.
01 / The problem
At Hungarian business gas prices (net, 9 October 2026 basis: about HUF 40.4 per kWh, range 32.1–56.9), heating a 2,400 m² older panel-clad warehouse costs about HUF 7.5 million per season in our worked example. Failed dock seals, tired door gaskets, open panel joints and wet roof insulation take a share of that bill straight outdoors – and from the outside you can see almost none of it.
Gas prices move, so every figure is tied to a stated date and range, and the report recalculates with your actual tariff.
02 / What you get
The thermal camera only collects data. The value is turning every defect into a location, a cause, a money figure and a ranking – so you can decide what to repair.
Every finding sits where it really is on the 3D heat map, with a photo pair.
Failed seal, wet insulation, open panel joint, thermal bridge – not just a “warm spot”.
Watts, kWh per season and HUF per season – as a range, with the assumptions shown.
What to do, with an indicative cost band. You choose the contractor.
Ranked by payback, with the quick-payback items first.
Simple payback in months – as a range, not a promise.
FINDINGPriority A
Example / illustration – figures are from the small defect level of the warehouse example.
03 / How it works
A thermal survey is only reliable when the indoor–outdoor temperature difference is large and the sun is not heating the structure. That is why we work in the evening and before dawn, during the heating season.
On an agreed night we take thermal images and photo pairs inside and outside, recording the conditions. If the weather fails, we reschedule free of charge (up to 2 times).
Images are registered onto a 3D model of the building. Our building-services practitioner and mechatronics engineer identify the defects, estimate their losses and rank the repairs.
PDF report, 3D heat-map link, action list and raw files – then a walkthrough so you leave ready to decide on the repairs.
Our measurement conditions, limits and calculation method, in the open: Method and limitations
04 / A worked example
60 x 40 m, older sandwich-panel envelope, gas radiant-tube heating, 16 °C. Three possible defect levels at the gas price of 9 October 2026. This is a fictional but realistic example – not customer data and not a promise.
| Defect level | Minor (localised) | Medium | Large, widespread |
|---|---|---|---|
| Findings | 3 | 8 | 13 |
| Heating lost (central) | HUF 120,000/season | HUF 620,000/season | HUF 2,700,000/season |
| Range | HUF 93,000 – HUF 160,000 | HUF 490,000 – HUF 880,000 | HUF 2,200,000 – HUF 3,900,000 |
| Share of the heating bill | 1.5% | 7.6% | 26.6% |
| Quick-payback (A) items only: saving | HUF 50,000/season | HUF 270,000/season | HUF 1,700,000/season |
| Fix cost of those items (central) | HUF 90,000 | HUF 160,000 | HUF 1,600,000 |
| Payback (fix cost only) | 22 months | 7 months | 12 months |
The fault-free hall costs HUF 7,540,000 per season to heat in the model (HUF 5,990,000 – HUF 10,600,000).
With a minor defect level usually one item – here the door seal – pays back quickly. We tell you that too: the report also says what is not worth fixing.
The survey price in this example is HUF 489,000 + VAT (list price), or HUF 275,000 + VAT under the pioneer programme. Savings only materialise if the repairs are carried out; the survey alone saves no energy.
Estimate – not a guarantee. Figures are model-based and actual values may differ.
05 / Who it is for
We help where the heating, cooling or energy bill already hurts, but a full engineering-office project would be overkill.
Dock seals, sectional doors, panel joints, wet roof insulation.
Doors, roof, warm-air heaters, areas around process extraction.
Entrance and air curtain, shopfront joints, flat roof.
Cellar structure, cooling, thermal bridges, ventilation.
Door seals, panel joints, cold loss.
Pool hall, pipework, ventilation, roof.
Suspected leaks, wet insulation, pipe routes.
Schools, sports halls, community buildings: losses and priorities.
Livestock, storage, cooling and drying buildings.
Screening for warming connections – not a safety inspection.
Tell us what you operate – we will say honestly whether a survey makes sense.
Building envelope, roof, pipes, electrical cabinets – an overview.
06 / Case studies
Built from open-licensed images, a free 3D model and simulated data, they show what a 3D heat map and a finding look like. Every page states its sources.
Window lintel, roller-shutter box, slab edge and eaves: typical defects on a rotatable 3D model.
A loose connection wastes only a few watts, but the failure it can lead to costs and risks far more. An early warning – not a safety inspection.
Wet pre-insulated hot-water pipe between two buildings: the camera finds the place, the make-up water meter gives the magnitude.
07 / Pricing
Prices are net, excluding 27% VAT. We quote from your facility data with no hidden costs; travel from Tiszavasvári is free up to 40 km.
2D thermal survey with a loss list in HUF.
from HUF 190,000
+ VAT · up to 1,000 m²
3D heat map + engineering analysis – one shared, rotatable picture of the whole building.
from HUF 390,000
+ VAT · up to 1,500 m²
Suspected wet flat roof and PV hot spots – subject to airspace and permits.
from HUF 140,000
+ VAT · up to 2,500 m²
Annual programme: 1.5 × the base package (from HUF 285,000 / HUF 585,000) – winter survey, summer check and a re-scan after repairs. Full price list and example quotes
08 / Straight talk
09 / Who we are
Two disciplines work together so that a thermal image becomes more than a picture. Company details and a fuller team introduction follow before the public launch.
Heating, ventilation, cooling, doors and roofs in the real world: this tells us what is a likely cause, what is not, and what is actually fixable.
[NN] years of field experience
Sensors, data processing, 3D registration and the calculation model: this turns thermal images into results you can measure and check.
A four-eyes check: whoever compiles a finding does not approve it. An uncertain finding is marked “to be verified”, not guessed.
10 / Service area
We work in five main towns and around them. Travel is free up to 40 km from Tiszavasvári and HUF 15,000 + VAT up to 80 km.
11 / FAQ
Tell us briefly what you operate. We reply by the next working day at the latest, and before any survey we make clear what you get and for how much.